Hopper dryer is the replacement product of standard hot air dryer, which is improved on the basis of the original function to fully consider the environmental factors. It can dry raw materials that are moist from packaging, transportation or recycling.
In the processing of raw materials, the hopper dryer blows a constant high-temperature wind into the drying barrel through a drying fan. After baking the raw materials, the original moisture of the raw materials in the barrel is taken away so as to achieve the purpose of removing the moisture contained in the raw materials. After heating by electric heating, the air blown out by the fan becomes a high-temperature dry hot air. Through the screen protector and hole screen, the hot air can be evenly dispersed into the raw materials in the drying drum. Optional hot-air recovery device, the air is blown out through the return air filter into the drying fan to form a closed loop to save electricity.
The high-performance hot air diffuser is adapted to keep the plastic drying temperature even and increase drying efficiency.
The special design of hot air elbow can avoid powder accumulation at the bottom of the electric heat pipe and cause combustion.
The inner and inner parts of the barrel shall be made of stainless steel.
The material bucket is separated from the bottom, making it easy to clear the material and quick to replace it.
The temperature can be controlled accurately by means of proportional deviation indicating controller.
Double overheat protection to reduce accidents caused by man-made or mechanical failure.
All kinds of models can provide preheating timing device, microcomputer control, and double insulation drum selection.
It will start automatically when hours are set.
Provide intermittent drying mode to achieve the purpose of saving electricity.
Transparent window type magnet base.