Features of the environment-friendly plastic pipe production line, PE pipe production line, PVC pipe production line, and PPR pipe production line in actual use.
When the outer diameter of the pipe is less than 25mm, the pipe and the pipe fittings should be connected in a clamp type, and when it is greater than or equal to 32mm, it should be connected in a clamping sleeve type. When connecting the pipes of the plastic pipe production line with other pipe accessories, valves, etc., special external thread clamps or sleeve type connectors should be adopted. The water distribution point of the pipeline shall adopt internal threaded fittings made of corrosion-resistant metal materials and shall be fixed to the wall.
S6.3 series can be adopted for multi-storey construction, S5 series can be adopted for high-rise construction (but not suitable for high-rise construction backbone pipes and pump rooms); S6.3 series can be adopted when the outdoor pipeline pressure is not greater than 1.0MPa; S5 series should be adopted when it is greater than 1.0MPa.
The nominal pressure of the pipes and fittings used in the construction should be 1.6MPa; the pipe connection of the plastic pipe production line should adopt socket connection, or rubber seal ring connection.
When the pipes of the plastic pipe production line and the metal pipes are flanged to the accessories, it is advisable to adopt injection molding to connect with the metal flange of the flange with socket. The connection between the pipeline and the water hydrant shall be made of plastic reinforced pipe fittings, inlaid metal or corrosion-resistant metal pipe fittings.
Our company is a high-tech joint-stock enterprise integrating scientific research, development, production, operation and technical services of plastic machinery and plastic products. The company is located in the second Sinotrans Industrial Park, Jiaozhou City, Qingdao, only 30 minutes' drive from Qingdao Airport. Many expressways pass through Jiaozhou City and the transportation is very convenient. If you have any need, please feel fress to consult.
Features and Uses of Pipe Extruder LineJune 25, 2021Ⅰ. Features of pipe extruder lineThe pipe extruder line is a new type of green pipe formed by extruding a composite anticorrosive, hygienic, non-toxic inner and outer plastic layer on the surface of ...viewWhat Are the Functions of the PVC Pipe Production Line Equipment?July 27, 20211. The raw material mixing of the PVC extruder machineAdd PVC stabilizers, plasticizers, antioxidants, and other auxiliary materials to the high-speed mixer according to the ratio for processing. The ...viewRigid Pipe Production Line Process DiagramMay 30, 2022the pipe is put in the bin and suck the material by itself so it means automatical loaderviewThe Maintenance of the Pipe Extrusion Line Cannot Use Brute ForceApril 21, 2021Ⅰ. What is a pipe extrusion line?The pipe extrusion line is a new type of green pipe formed by extruding a composite anticorrosive, hygienic, non-toxic inner and outer plastic layer on the surface of...viewThe Melt Viscosity of PVC Pipe Production Line is HigherOctober 22, 2021The melt viscosity of the PVC pipe production line is high, so a higher injection pressure is adopted.Ⅰ. The pressure level of the PVC pipe production line is divided into three cases1. For large and...viewCorrect Maintenance Can Make Better Use of PVC Production LineDecember 24, 2021The correct use of the PVC production line can avoid threats to the operator's personal safety and prevent equipment problems. The PVC pipe production line can be used better, and it will bring gr...view
Call us on: 
Email Us: 
No.398B-9, Jiaozhou West Road, JiaozhouCity, Qingdao City, China. 
EN
fr 
es 
it 
ru 
ar 
da 
fi 
pl 
bg 
nl 
